OEM WATER HEATER GAS BURNER ASSEMBLY from US Craftsmaster model # G1E3033T3N

Description

OEM WATER HEATER GAS BURNER ASSEMBLY from US Craftsmaster model # G1E3033T3N Condition is Used.
Used.  Tested.   Works
This burner assembly was recovered from a fully functional US Craftsmaster water heater model # G1E3033T3N that was decommissioned for upgrading.
Other water heater models this burner assembly has been recovered from:
- GE model # G1E3033T3N
- GE model # G1E3033T3NV
Measurements:
- extension of arm horizontally: 11" (approx) - see picture 2.
- Extension of arm vertically: 7.5" (approx) - see picture 5.
- Extension of arm from from 90° bend to gas exit oriface: 9" (approx) - see picture 3.
- Diameter of burner plate: 6 5/8" - see picture 4.
- outer thread diameter of main gas pipe fitting:  11/16" to 3/4" (tapered thread)
- Outer diameter of threads on brass pilot compression fitting: 13/32"
Please excuse all minor dust and dirt from prior use.   In order to offer you the most competitive price possible, no effort has been made to clean this part whatsoever.
This same exact burner assembly was used on many other U S Craftsmaster water heater models but it requires very close checking and comparison of all measurements illustarted in the pictures in comparison to the burner plate you are replacing before a match can be determined.
If you have a similar assembly but with a different lengths to the extension of the main gas pipe arm, i may have the assembly you need unlisted in my stock.  Contact me with the dimensions you have and i will see if i have a match.
Thermocouple: Although the thermocouple included with this assemebly had been working in its prior installation, it is not included in the 30 day warranty
For reference, the very last picture has been included showing the tag that was on the water heater this burner assembly came from.  You will not receive a tag with your purcahse of this burner assembly.
**30 day warranty** begins on first day of delivery
Thanks!
Code for internal use only:  JMBBRNR