Neo Geo MVS MV-1F Custom Setup, Joysticks, RGB SCART, Power Supply, Cables

Description

Game, ESD Mat, Display pictured not included.
Neo Geo MVS MV-1F Custom setup, 2 X-Arcade Joysticks, RGB Female SCART Audio/Video out, Power Supply, Custom Cables, Printed Manual.
Works Great.
Details:
Started with a MV-1F board and then bought a adjustable power supply to provide the 12v and 5v power needed. My volt meter shows 4.99v. It is fully protected by ground/fuse box and all contacts are insulated. Then I bought a Jamma harness and wired it to connect to a custom SCART female plug for RGB and Audio. The audio is connected to the headphone jack on the MB and you can adjust the volume with the slider. It also has a custom wire connection to db-15s for each X-arcade joystick. The joysticks are also custom and are directly wired to 15pin connectors, these joysticks only work with the MV-1F and they have custom replacement parts for the 4 buttons and a green joystick (better than the orginal x-arcade parts). The SCART plug includes electronics to get the correct levels out to a RGB screen. Manual is included with notes. There are two buttons to operate the service and test functions for each games menu settings. The bios is stock but the board has a socket for the chip so its possible to upgrade it to a UNI BIOS. Lastly, there are two wood mdf blocks that I use to eject the cartridge, its much less force on the board.
Its ready for a custom enclosure, or just use it as is. I recommend a ESD matt connected to a ground for safety but the board is on plastic mounting stands so it does not touch the surface. I would not place it on carpet under any circumstance.
I will protect it in a anti static bag and it will be double boxed to protect from the joysticks in a large box. Shipping is calculated and will include insurance. The box is large and about 20 lbs.